Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Aseaheru]

Was also still missing army 8, so probably for the best, woulda been another round of "so, what do you want..?"

[Khang36]

Eh current traveling around Europe with my family like i said on discord, so my posts are not going to be as organized as i would like.

Also for uniforms can i use one design for dress, helmet and kit or do those have to be seperate designs?

[Aseaheru]

 Depends on the complexity of components. Good helmets(stallhelms, brodies, or better) are a design on their own, as would webgear, gasmasks, camouflage, and so on.

[Khang36]

Ok i have been sitting on design for a while now here is what i have not entirely sure if the infantry kit design is valid though

Design

Spoiler: PA SLR 1921 (click to show/hide)

PA SLR 1921
The Providence arsenal self loading rifle model 1921 or PA SLR 1921 is as the name implies a semi-automatic rifle chambered for the 6.5×54mm P, using a gas operated action to self load and can be manually loaded by operating the bolt, it uses a rotating bolt action to lock. It has a detachable box magazine with a capability of 10+1 rounds while soldiers can load the gun be swapping magazines they can also load rounds in through the open receiver be hand or with 5 round striper clips. The rifle measures to about 110 cm in length with the barrel being about 60 cm. the SLR 1921 has an aperture sight zeroed in at 50m and can be adjusted up to 700 m at 50m increments. Additionally there is a railing in front  of the iron sight with screw holes drilled in the sides to allow solders to mount a scopes and any other sighting equipment with out obstructing the iron sight. The rifle has a lug below the muzzle to attach a bayonet.

Spoiler:  Standard infantry kit-1921 (click to show/hide)

Standard infantry kit-1921
The standard infantry kit is a set of items and equipments that are issued to all infantry with some additional ones for specialized units. All kits comes with the following as standard
A simple battledress consisting of an olive green tunic, an olive green trouser, a leather belt, and a dark olive fabric cap. Rank is denoted by sholder patches.
Cotton blanket.
A hooded cloak made of waxed cotton
A wool coat for cold weather
A pair of triger finger mitten
A treated canvas sheet to be used as a small tent or hammock
A haversack made of treated canvas with adjustable leather straps and buckle for weight distribution.
A satchel bag made of treated canvas
A spade
Water canteen
Mess kit
10 m of hemp rope

Revisions

fix the CSRE 1921
Fix the gun housing to removing the jamming problems caused by over heating and improve the build quality, move the forward grip to the otherside of of the magzine reciever, in front, to make it less awkward to handle. If possible a replacing the rotary magazine with a 25 round box magazine that is cross compatible with the PA SLR being designed.

reverse engineer
M15 Stielhandgranate

[Aseaheru]

Whats wrong with the rotary magazine? It was given so that the user could get low with the single-stack box mags they where testing, because magazines are hard and aint noone seen a detachable double-stack single-feed.
So, self-loading rifle with rotary-style bolt? Allright. As a note for ahead of time, no bayonets are in stock.

On Uniform Gubbins: Four designs. One for uniform, the second for the ammobelt(Its just a tad toocomplex, sorry), third for bayonet/utility spade, fourth for medkit/trauma kit. Note, this would also result in atleast 4 production lines before taking into account the potential of variant production that Ive been knocking about. With them, probably three.

That said, some other bits and pieces could be included in those extra three designs.

[Khang36]

Yeah the rifle uses a rotating bolt

Ok i will go work on changing the kit grubing stuff to drop the some of the items to fit in one design tomorrow (it's 2 am here) thank you for the feed back

[Aseaheru]

Bolt handle is what I was asking about, but thats also good to know, Ill go hide the tilting bolt data then...

[Khang36]

If i make the design for just a uniform can i include camouflage patterns as well or will it be a seperate design?

[Aseaheru]

 Factory-made camoflauge is a design of its own due to complexity not only getting the pattern right to begin with(unless you want sofacamo) but reproducing it on cloth.

[Khang36]

Ok made changes to the two designs specifying that the rifle uses a rotating bolt. And edited the infantry kit to remove all of the design worthy items other than the uniform, and replaced the utility spade with a normal one.

[Aseaheru]

 Voting would, at this stage, be useful.

[Naturegirl1999]

Ok i have been sitting on design for a while now here is what i have not entirely sure if the infantry kit design is valid though

Design

Spoiler: PA SLR 1921 (click to show/hide)

PA SLR 1921
The Providence arsenal self loading rifle model 1921 or PA SLR 1921 is as the name implies a semi-automatic rifle chambered for the 6.5×54mm P, using a gas operated action to self load and can be manually loaded by operating the bolt, it uses a rotating bolt action to lock. It has a detachable box magazine with a capability of 10+1 rounds while soldiers can load the gun be swapping magazines they can also load rounds in through the open receiver be hand or with 5 round striper clips. The rifle measures to about 110 cm in length with the barrel being about 60 cm. the SLR 1921 has an aperture sight zeroed in at 50m and can be adjusted up to 700 m at 50m increments. Additionally there is a railing in front  of the iron sight with screw holes drilled in the sides to allow solders to mount a scopes and any other sighting equipment with out obstructing the iron sight. The rifle has a lug below the muzzle to attach a bayonet.

Spoiler:  Standard infantry kit-1921 (click to show/hide)

Standard infantry kit-1921
The standard infantry kit is a set of items and equipments that are issued to all infantry with some additional ones for specialized units. All kits comes with the following as standard
A simple battledress consisting of an olive green tunic, an olive green trouser, a leather belt, and a dark olive fabric cap. Rank is denoted by sholder patches.
Cotton blanket.
A hooded cloak made of waxed cotton
A wool coat for cold weather
A pair of triger finger mitten
A treated canvas sheet to be used as a small tent or hammock
A haversack made of treated canvas with adjustable leather straps and buckle for weight distribution.
A satchel bag made of treated canvas
A spade
Water canteen
Mess kit
10 m of hemp rope

Revisions

fix the CSRE 1921
Fix the gun housing to removing the jamming problems caused by over heating and improve the build quality, move the forward grip to the otherside of of the magzine reciever, in front, to make it less awkward to handle. If possible a replacing the rotary magazine with a 25 round box magazine that is cross compatible with the PA SLR being designed.

reverse engineer
M15 Stielhandgranate

+1 to all

[Aseaheru]

 That would be eight tokens out of six.

[Naturegirl1999]

That would be eight tokens out of six.

Oh
+1 to fixing the CSRE 1921 then

[Aseaheru]

 And the other five tokens?