Bay 12 Games Forum

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 ... 5 6 [7]

Author Topic: Great War Arms Race: Grand Duchy of the Vornfolk. 1900 Revision Phase.  (Read 5203 times)

WorldOfHurt

  • Bay Watcher
    • View Profile

Quote from: vote
M1904 15cm haubits (0):
M1904 18cm 'Onager' haubits (3): MoP, khang36, UristMcRiley
Jaktplan 904 "Silvåkra" (1): WorldOfHurt
I'm going to be different.
Logged

Maxim_inc

  • Bay Watcher
    • View Profile

Quote from: M1904 18cm 'Onager' haubits
The Onager is a heavy howitzer siege gun boasting a bore diameter of 18 cm. the gun uses a split trail carriage and is designed for up to 45 degrees of elevation.like our 8cm gun the Onager has hydro-pneumatic recoil system to deal with it's heavy recoil but unlike our 8cm gun it uses interrupted screw breach block and are loaded with separate shell and powder bags which allows the gun crew to load variable propellant loading for different MV and range. The barrel length is 4m long to ensure that it will have be able to provide long range fire hopefully out ranging any existing confed artillery..

Dice Gods Say: 8

The M1904 18cm 'Onager' haubits is quite the tool of destruction, designed to out-range and out-shell the Kalchan 12cm cannons. The testing of the recoil system proves that its adequate for the job and dampens the recoil well, though like all heavy cannons it still requires a dug in position and return ramps for shelling since the recoil forces the entire carriage backwards a short distance. The screw breach and the separate shell and powder system are streamlined by providing the crew with powder holders so they can lift up and shove as many bags of propellant as they need into the breech at once! The High Explosive shells fired by the Onager themselves are of very good quality with great care put into getting the maximum amount of explosive material inside of it while retaining good ballistics and strength. The barrel itself is made well and with good rifling, though the length and weight means it must be transported separately from the gun breech and carriage.




It is now the Revision Phase!

Vornfolk Armory:
Spoiler (click to show/hide)
Logged

Khang36

  • Bay Watcher
    • View Profile

Quote from: 8.0cm Luftvärn Kanone
the 8.0cm luftvärn Kanone is a revision to our 8.0cm Fält to allow the gun to serve as an anti air weapon. Firstly the the 2 wheeled split carriage is replaced with a 4 wheeled outrigger carriage that allows for 360 traverse and up to 85 degree elevation. Secondly the barrel will be lengthened to provide higher MV and there for range. finally a new shrapnel shell will be provided that will be lighter than the normal shrapnel shell to allow for even more higher MV and there for range and the shrapnel will be coated in phosphorus for incendiary effect to better take out those confed gas bags. of course as it is the Luftvärn Kanone is based off the Fält it can use the normal 8cm shells and serve as a field gun when not shooting down air targets.


Quote from: vote
8.0cm Luftvärn Kanone(1):Khang36
« Last Edit: July 08, 2021, 12:01:02 pm by Khang36 »
Logged

UristMcRiley

  • Bay Watcher
    • View Profile


Quote from: vote
8.0cm Luftvärn Kanone(2):Khang36, UristMcRiley
Logged

m1895

  • Bay Watcher
    • View Profile

Quote from: vote
8.0cm Luftvärn Kanone(3):Khang36, UristMcRiley, m1895
Logged
Pages: 1 ... 5 6 [7]